Mounting the Base
Directly on the Wall
To mount the base directly on the wall, you need two wood screws (not sup- plied) with heads that fit into the key- hole slots on the bottom of the base.
1. Drill two holes 315/16 |
|
|
|
| ||||
| 5/16 | |||||||
inches apart. Then |
|
|
| |||||
|
|
|
|
| ||||
thread a screw into |
|
|
|
|
|
|
| |
|
|
|
|
|
| |||
each hole, | letting |
|
|
|
|
|
|
|
the heads | extend 315/16 |
|
|
|
|
|
|
|
about 5/16 inch from |
|
|
|
|
|
|
| |
the wall. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5/16 | |
|
|
|
|
|
|
| ||
|
|
|
|
|
| |||
2.Plug one end of the modular cord into the TEL LINE jack on the back of the base.
3.Plug the supplied AC adapter’s barrel plug into the DC IN 9V jack.
10
4.Route the adapter and modular cords through the upper and lower grooves on the bottom of the base.
Upper
Grooves
Lower |
Grooves |
5.Align the keyhole slots with the mounting screws and slide the base downward to secure it.
