43-774.fm Page 8 Friday, August 13, 1999 3:14 PM

4.Route the adapter’s cord through the strain relief slot on the back of the base.

Strain Relief Slot

5.Plug the adapter into a standard AC outlet. The POWER indicator on the base lights.

6.Fully extend the base’s antenna and place it in a vertical position.

8

Mounting the Base on a Wall Plate

To make this connection, you need a short modular cord, such as Ra- dioShack Cat. No. 279-390 (not sup- plied).

1.Plug one end of the modular cord into the TEL LINE jack on the back of the base.

2.Plug the supplied AC adapter’s barrel plug into the DC IN 9V jack.

Page 8
Image 8
Radio Shack TAD-1015 owner manual Mounting the Base on a Wall Plate