Radio Shack TAD-1015 owner manual Using Flash, Paging

43-774.fm Page 16 Friday, August 13, 1999 3:14 PM

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by follow- ing these steps.

1.Be sure P∙ ∙T is set to P (pulse).

2.Lift the handset from the base or press TALK.

3.Dial the service’s main number.

16

4.When the service answers, press TONE/ . Any additional numbers you dial are sent as tone signals.

5.After you complete the call, return the handset to the base or press TALK. The phone automatically resets to the pulse mode.

PAGING

To send a page from the base to the handset, when the phone is not in use, press PAGE on the base. The handset beeps five times. If you hold down PAGE for more that 2 seconds, the handset beeps until you release it.

Note: Paging does not work while the phone is in use.