INSTALLING THE PHONE
Placing the Base on a
Desk Top
1.Remove the mounting bracket by holding in both tabs and gently pull- ing out the wide end of the bracket.
2.Plug one end of the supplied long modular cord into the telephone jack on the back of the base.
3.Plug the modular cord’s other end into a modular phone line jack.
4.Insert the supplied AC adapter’s barrel plug into the DC 9V jack on the back of the base.
5.Route the adapter’s cord through the strain relief slot on the back of the base.
6.Insert the tabs on the narrow end of the bracket into the inner pair of slots near the bottom of the base as shown and snap the tabs at the wide end of the bracket into place.
8
