43-732.fm Page 10 Friday, August 13, 1999 1:42 PM

5.Route the end of the modular cord through the hole in the bracket, and insert the tabs on the narrow end of the bracket into the inner pair of slots near the top of the base as shown.

6.Snap the tabs at the wide end of the bracket into place.

8.Plug the AC adapter into a standard AC outlet. The TAD-732 beeps and 00 appears.

9.Raise the base’s antenna to a verti- cal position.

7.Plug the modular cord into the wall plate jack. Align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.

Mounting the Base Directly on the Wall

To mount the base directly on the wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.

10

Page 10
Image 10
Radio Shack TAD-732 owner manual Mounting the Base Directly on the Wall