RECORDING A MEMO
A memo is a message you can record at the TAD, without having to call in on the phone. The
To record a memo, hold down MEMO. The TAD beeps, and the display begins counting down from 60 seconds. Speak in a normal voice about 8 inches from the front of the TAD. When you finish, release MEMO.
The memo is stored with the incoming messages. To hear the memo, simply play back your messages.
Note: If the TAD’s memory is full (FL and the number of messages alternately appear on the display), you must erase some messages before you can record a memo.
CHANGING THE REMOTE OPERATION SECURITY CODE
The
Notes:
•Be sure to set each digit within 8 seconds. Otherwise, you must start over at Step 1.
•If AC power fails and the backup battery becomes weak, the remote operation security code automati- cally resets to 759.
1.Hold down CODE for about 2 sec- onds. The TAD beeps, and the first digit of the preset code flashes on the display.
2.Press SKIP or REPEAT to set the first digit, then press STOP. The TAD beeps, and the second digit appears and flashes.
3.Press SKIP or REPEAT to set the second digit, then press STOP. The TAD beeps, and the third digit appears and flashes.
4.Press SKIP or REPEAT to set the third digit, then press STOP. The TAD beeps and shows the new security code in sequence.
To see the currently set code at any time, press CODE.
17
