Rangemaster 90 Ceramic installation instructions The clock, Gb/Ie

GB/IE

The clock

To set the correct time of day.

See the ‘2 Minute Tour’ at the beginning of this guide.

To time something that’s cooking (minute minder)

Press and hold as above. At the same time press (-) or (+) until the time you want to cook for is shown, as below.

You can check time remaining by pressing and cancel the beeper by pressing

To stop automatically

Use when you have started the oven manually.

Press and hold as above. At the same time press (-) or (+) until your required ‘Stop Time’ shows. AUTO will show in the display. When your cooking is finished the beeper sounds. TURN

THE OVEN KNOB TO 0 FIRST, then press

once to stop the beep, press again to return to manual cooking.

To start and stop the oven automatically

Before you set the clock, you must have two numbers clearly in mind.

The ‘cook period’, which is the period of time you want the oven to cook.

The ‘stop time’, which is the time of day you want the oven to stop cooking.

You cannot set a start time directly - this is set automatically by setting the cooking period and stop time.

Press and hold as above. At the same time press (-) or (+) until your required ‘cook period’ shows.

Then press and hold as above. At the same time press (-) or (+) until your required ‘stop time’ shows.

AUTO will show in the display.

Set the oven to the required temperature. When your cooking is finished the beeper sounds. TURN THE OVEN KNOB TO 0 FIRST, then

press once to stop the beep, press again to return to manual cooking.

If you are out, don’t worry about the beeper going off, it stops after a while. When you return, TURN

THE OVEN KNOB TO 0 FIRST, then press twice, to return to manual cooking.

AUTO is showing, you want to reset to manual cooking.

When cancelling an automatic setting, any cooking time already set must be returned to 0.00 before you can return to manual, by pressing the

button.

13