Rangemaster Double Built in Oven Users Guide, Removing the shelf supports, Oven accessories, Page

USERS GUIDE

This will lock the hinges in the open position.

Stand in front of the oven and grasp the open door with one hand on each side. Lift the door as if closing it until it is at an angle of about 30º, then continue lifting the door towards you, out of the hinge slots. The door can now be placed on a convenient surface for cleaning.

Do not immerse the door in water.

Clean the enamelled interior surface and the glass using a damp cloth and a proprietary mild cream cleaner, rinse, and then dry carefully using a soft cloth. If necessary, the inner door glass can be removed by unscrewing the two lateral fixing screws (see diagram). Make sure that the glass is dried thoroughly before re-fitting. Take care not to over tighten the fixing screws when re-fitting.

Re-fit the door by holding at a 30º angle and locating the locked hinges in the hinge slots. Open the door fully, disengage the metal loops (A) and lower them so that they lie flat on the hinges

(B). Close the oven door.

Removing the shelf supports

Some models have detachable shelf supports, which can be removed, from the oven for cleaning by hand or in a dishwasher.

Grasp the shelf support and press downwards to release from the clip device on the lowest runner (see diagram).

The shelf support can then be hinged upwards and lifted from the mounting holes in the upper corners of the oven prior to removal.

To re-fit the shelf supports, reverse the procedure, ensuring that the clip device engages firmly on the lowest runner.

Oven accessories

The oven shelves, oven pans and trivets should be washed in hot water with a mild detergent then dried carefully, or they can be washed in a dishwasher.

Cleaning the oven interior

The interiors of the ovens have an enamelled finish. In order to make cleaning easier, any spillages should be

Page 11