To fit the small inner burner, find the larger electrode notch in the burner rim. Line this up with the white ignition electrode and place the inner burner on the large base ring.
A | electrode notch | B | ignition electrode |
Now fit the two burner caps, making sure that they are sitting down properly.
Grill
The grill pan and grid should be washed in hot soapy water. After grilling meats or any foods that soil, leave to soak for a few minutes in the sink immediately after use. Stubborn particles may be removed from the grid by using a nylon brush. Alternatively the grill pan can be washed in a dish washer.
To remove the grill pan support frame, pull the grill pan forward.
Lift the grill pan clear of the support frame. The support frame is held to the side rails by two clips on each side.
For each side, support the side rail with one hand and with the other hand lift the frame up and out of the side clips.
For safety, push the side rails back into the grill chamber.
The side rails can be removed to make cleaning the grill chamber easer by unhooking them from the grill chamber sides.
Slides can be wiped clean with soft cloth and mild detergent.
Do not use any abrasive substance.
DO NOT put the side runners in a dishwasher
When you have finished, hook the side rails back onto the sides of the chamber. To refit the frame pull both side rails forward and equal amount. For each side in turn support the side rail and press the frame down into the side rails. Replace the grill pan.
Control Panel and Doors
Avoid using any abrasive cleaners including cream cleaners, e.g. Cif, on brushed Stainless Steel surfaces. For best results use a liquid detergent e.g. Domestos Multi Surface Cleaner.
The control panel and control knobs should only be cleaned with a soft cloth wrung out in clean hot soapy water. Wipe with a clean dampened cloth then polish with a dry cloth. The oven doors should only be cleaned with a soft cloth wrung out in clean hot soapy water.
17
