The Wok cradle
The Wok cradle is designed to fit a Typhoon™ Professional 35cm Wok (Part Code 13840S)
This is available from leading retailers.
If you use a different Wok make sure that it fits the cradle. Woks vary very widely in size and shape. It’s important that the Wok sits down on the pan support - but if the Wok is too small the cradle will not support it properly.
The cradle should be used on the triple ring Wok burner only.
When you fit the cradle check that the Wok is properly located on the front and rear fingers and that it is supported properly on a pan support.
Make sure the cradle is stable and that the Wok is sitting level in the ring.
The cradle will get very hot in use - allow plenty of time for it to cool before you pick it up.
Care and Cleaning
Essential information
Never use paint solvents, washing soda, caustic cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt.
Recommended cleaning materials are hot soapy water, a moistened soap pad, cream cleaner or a nylon scourer.
5
