Ratoc Systems CB31U 2-1-3.Removing the CB31U

2. Setup

7.Click on the General tab. If This Device is working properly appears under Device status, you installed the CB31U driver correctly.

Windows95

When you want to remove the CB31U from the PC, you have to follow these steps through.

1.Click the PC Card icon on the Windows taskbar.

2.You will see the message saying Stop REX CB31.

3.Select Stop SCSI CardBus PC Card REX CB31.

4.When the window saying You may safely remove this device appears, you can remove the CB31U from the PC.

5.Press an eject button of the PC Card slot (1). Grasp the CB31U by the edge and pull it straight out of the PC Card slot (2).