6. How to install Windows 2000

6-2. Install a new copy of Windows 2000

Follow these steps through:

1.Format the HDD where you want to install Windows2000 first.

2.Start setup program of Windows2000 from the SCSI CD-ROM connected to the CB31U. 3.When setup starts,you can see two ways to install Windows2000 on the screen:

-[Upgrade to Windows2000(Recommended)]

-[Install a new copy of Windows2000(Clean Install)] 4.Select [Install a new copy of Windows2000(Clean Install)].

5.After typing in the Product Key, click [Advanced Options] on the [Select Special Options] screen saying [To review or change the default Setup options for copying files,click (Advanced Options)].

6.Check [Copy all setup files from the setup CD to the hard drive] on the [Advanced Options] screen and click [OK] button.

7.Install Windows 2000, following the instructions. 8.Before you restart your system, remove the CB31U. 9.When you finish installing it,set up the CB31U if you need it.

6-3. Install Windows 2000, using Windows 95/98 startup disk

Follow the steps below:

1.Make a Windows 95/98 startup floppy disk, refering Chapter 6-2 or 6-3 and have your CD-ROM recognized by the Windows 95/98 startup floppy disk.

2.Format your internal HDD, if necessary.

3.Start [WINNT.EXE] file in the [i386] directory in the Windows2000 CD-ROM.

4.Install Windows 2000, following the instructions.

5.Before you restart your system, remove the CB31U.

6.When you finish installing it,set up the CB31U if you need it.

Windows2000

63