8. Troubleshooting

8-3. If your laptop is made by TOSHIBA

I can use 16-bit PC Card with my laptop made by TOSHIBA, but I can not get a CardBus PC Card up and running.

1.Shut down your laptop.

2.Start your computer.

3.Press the ESC key at boot time.

4.When Check system. Then press [F1] key is displayed, press the F1 key.

5.When BIOS-SystemSetup(1/2) is displayed, select CardBus/16-bitunder PC Card Controller Mode.

6.Press the End key to restart your system.

8-4. If you use FUJITSU MO(M2512A, M2513A)

System locks up when I connect old model MO of which drive engine is M2512A, M2513A

You need to install our SCSI configuration utility and change transfer rate with it.

If you are using Windows 95/98/Me, refer to Chapter 9-4-1 and set transfer rate to 10MB/sec. If you are using Windows 2000, refer to Chapter 9-4-2 and set transfer rate to 10MB/sec.

87