1)Make sure the SCSI device is in Pow

2)Decide whether you daisy-chain SCS 2-1)If you connect two or more SCS Daisy-chain them and attach SCSI device, as Fig.2 shows. the SCSI devices if the SCSI

If you are not sure how to

’s manualthethat accompanieduser your SCSI device.

2-2)If you connect only one SCSI device, set it as follows:

If the SCSI device doesn’t have an internal terminator switch, attach an external active terminator to the SCSI device; Otherwise, turn on

an internal terminator switch. If you are not sure how to turn off

the terminator switch, refer to the user’s manual that accompanied your SCSI device.

3)Next, connect the U2SCXU to the fir If you have a SCSI device with or DB25 connector, use an adapt Inrefersuchto Chaptercase,6.

4)Make sure each SCSI device has a SC change a SCSI ID with a switch information,’s manual thatreferaccompaniedtoyourtheSCSI deviceuser.

5)If you use a PC, proceed to Chapter 2-2.

If you use a Mac, proceed to Chapter 2-8.

5