Windows
[Mass storage mode]
You can switch from the RATOC original driver to the Microsoft standard driver by clicking this button, when the U2SCXU is using the RATOC original driver.
[SCSI emulation mode]
You can switch from the Microsoft standard driver to the RATOC original driver by clicking this button, when the U2SCXU is using the RATOC original driver.
[Mass storage mode/SCSI emulation mode Auto] Automatically detects which mode to take.
[Bus Reset Enable]
Default value is enabled.You can set whether or not the U2SCXU issues SCSI bus reset to a SCSI device.
[Parity Check Enable]
Default value is enabled. You can set parity check enable or disable. [Start Unit Enable]
Default value is disabled. You must enable START UNIT command for some SCSI devices which won’t work if they doesn’t receive this START UNIT command.
[Power On to Bus Reset Delay Time]
Default value is 0. You can set delay time for some SCSI devices which hang up if SCSI bus reset is issued right after the U2SCXU gets powered. Set this value to 2 sec. for Castle Wood ORB drive, Canon FB620S or Sharp
Default value is 1. You can set delay time for some SCSI devices which hang up if SCSI command is issued right after SCSI bus resets.
38