A.Config Utility

In order to use this config utility, follow the steps:

Don’t remove the SCSI device from the U2SCXU.

1)Before you start this utility, you need to make sure of the following points:

Macintosh

 

a)Open [Extensions Manager] at [Control Panels].

 

b)Make sure your setting is[U2SCX Configuration] you made at step 3)

 

in Chapter 3-2-1.

 

c)Make sure the following drivers are enabled.

 

-U2SCXUsermodeDriver

 

-U2SCXUsermodeUTDriver

 

d)Make sure the following drivers are disabled.

 

-USB Authoring Support

 

-Authoring Support

 

-Disc Banner Extension

 

2)Make sure the U2SCXU is removed from a Mac and start the U2SCX Utility at the[U2SCX] folder. The following window will appear. Connect the U2SCXU to the Mac and click[OK].

51