Ratoc Systems U2SCXU manual 55

Macintosh

7)The following window will appear. Click [Quit].

8)You can find the [U2SCX] folder created at the destination you have made sure of it at step 6. Start U2SCX utility. The following window will appear. If you have the U2SCXU removed from a Mac, reconnect it.

If you have already removed the U2SCXU, connect it. After connecting, click [OK].

9)The following window will appear. Click [OK].

10)You are now ready to start the utility from the [File] menu. Select [Quit] from the [File] menu.

If you want to configure settings for a SCSI device connected to the U2SCXU, you need to select [Config Utility] from the [File] menu. Proceed to A.

If you want to update a firmware date on the U2SCXU, you need to select [Firmware update Utility] from the [File] menu. Proceed to B.

50