7)If you selected IBM-PC/AT FDISK format at step 6), the message box saying [You should create partition next] appears. Click [OK]. You will see the screen shown in step 5) and select [Create Partition] from the [Edit] menu. Finally, you will see the screen below. Select [File System] from the list box and set Partition size, using the slider bar.
Click [OK] to create partition. If you selected Super FD format at step 6), you will see a screen similar to the following. Select [File System] from the list box and click [OK].
Slider Bar
8)Remove the U2SCXU from the PC as described in Chapter 2-7 and then turn off the SCSI device and reconnect the U2SCXU and turn on the SCSI device for your changes to take effect.
If you are using a removable media, the media will be ejected to take effect.
