2-8.Connecting the U2SCXU to a Mac

Macintosh

Follow the steps through to connect the U2SCXU attached to SCSI devices:

1)If your PC is powered down, start it now. 2)Turn on the SCSI devices.

3)Connect the U2SCXU to an available USB port, as Fig.4 shows. A LED on the U2SCXU will come on. If the LED doesn’t come on, refer to Chapter 4-10.

4)If you connected a storage device, its icon will mount on the desktop.

If you remove the U2SCXU from a Mac, move the storage device icon to the trash icon, and then you can remove the U2SCXU from a Mac.

Some utility comes with the U2SCXU. For more information on it, refer to Chapter 3.

USB port

Fig. 4

32