A.Config Utility

You can configure settings for a SCSI device with the utility shown in the previous page. Refer to A in Chapter 3-1-1 for each item.

1)Click the [Start Configuration setting] button. 2)The following window will appear. Click [OK].

3)Remove the U2SCXU from the Mac and turn off the SCSI device attached to the U2SCXU.

4)Click the [Quit U2SCX Utility] button. The following window will appear. Click [OK].

7)Turn on the SCSI device and connect the U2SCXU to the Mac. Your settings now starts working

Macintosh

59