Manuals
/
Raypak
/
Household Appliance
/
Water Heater
Raypak
manual RayTemp Hot Water Energy Management Control
Models:
Hot Water Energy Management Control
1
1
30
30
Download
30 pages
15.13 Kb
1
2
3
4
5
6
7
8
<
>
Install
Warranty
DO NOT connect power until all wiring is complete
Erase Memory / Reset Program
Savings Test Setup
HL SELECT - Supply High Limit If the recovery temperature or the return temperature is very low, the RayTemp may need to take the supply temperature above the programmed maximum. Regardless of any conditions, the RayTemp will not take the supply or any branch temperature above this high limit value. If the supply temperature exceeds this value by 10F then alarm dial- out will be activated. Default Temp 140F
”Dip” Switch Settings On Circuit Board
Attaching The Temperature Sensors
First Screen At Power-Up
Using The Front Panel To Check Sensors And Relays
Page 1
Image 1
INSTALLATION AND OPERATING INSTRUCTIONS
Catalog No: 5000.61B
Effective:
04-15-05
Replaces:
09-01-02
RayTemp™ Hot Water Energy Management Control
P/N 241098
Page 2
Page 1
Image 1
Page 2
Contents
RayTemp Hot Water Energy Management Control
INSTALLATION AND OPERATING INSTRUCTIONS
Section 3. CONNECTING A COMPUTER OR “LAPTOP”
Section 2. INSTALLING THE CONTROL
WARRANTY
Section 1. GETTING STARTED
THE BIG PICTURE
Section 1. GETTING STARTED
ATTACHING THE TEMPERATURE SENSORS
Section 2. INSTALLING THE CONTROL
WHAT COMES WITH THE CONTROL
DO NOT connect power until all wiring is complete
PROVIDING 24 VAC POWER TO THE CONTROL
Resulting damage will void your warranty
and checked
Fig #
INSTALLATION LAYOUT
DIP Switch Setting on Circuit Board
”DIP” SWITCH SETTINGS ON CIRCUIT BOARD
Stage Connections on Heater
CONNECTING THE OPTIONAL “ELSA” BRAND MODEM
RT-RelayStatus
USING THE FRONT PANEL TO CHECK SENSORS AND RELAYS
BUILDING OR BUYING INTERFACE CABLES
Section 3. CONNECTING A COMPUTER
SIMULATED FRONT PANEL DISPLAY
INSTALLING PTT SOFTWARE ON YOUR PC
SPACE
BACK
READING LOGGED DATA
USING YOUR PC, PTT AND MODEM TO CALL A CONTROL
To end the modem session, select the following screen in the LapTop window
QUICK REFERENCE
Section 4. PROGRAMMING
Front Panel
Laptop
See page
Screen Code and Description - continued
MANUAL OVERRIDE
FIRST SCREEN AT POWER-UP
VIEW SENSORS AND RELAYS
TIME AND DATE
SECURITY PASSWORD
ERASE MEMORY / RESET PROGRAM
FRONT PANEL MENU / LOCK
TIME SCHEDULE
SUPPLY TEMPERATURE
HL SELECT - Supply High Limit If the recovery temperature or the return temperature is very low, the RayTemp may need to take the supply temperature above the programmed maximum. Regardless of any conditions, the RayTemp will not take the supply or any branch temperature above this high limit value. If the supply temperature exceeds this value by 10F then alarm dial- out will be activated. Default Temp 140F
NO. Default is YES
RETURN TEMPERATURE
RELAY SEQUENCING
BRANCH TEMPERATURE - NOT USED
SQ - SELECT
Firing Options
SENSOR OVERRIDE TEST
SAVINGS TEST RESULTS
SAVINGS TEST SETUP
SENSOR CALIBRATION
LOCATION TEXT
DATA MODEM SETUP
LapTop
Value
FAX MODEM SETUP AND TEST
Transmit
Day Graphs
Function Pages
Option
Status
Description
WARRANTY