Manuals / Raypak / Household Appliance / Water Heater

Raypak Hot Water Energy Management Control Programming, Quick Reference, Front Panel, Laptop

Models: Hot Water Energy Management Control

1 30

Download 30 pages 15.13 Kb

Page 14

Section 4. PROGRAMMING

QUICK REFERENCE

This section describes all the programmable features of the control. You make program changes from the front panel or by using a laptop. For information on connection with a LapTop using PTT software, refer to the previous section. The following keys provide access to all RayTemp display and programming features. These keys apply to the front panel or LapTop display as shown below. A screen saver clears the display after five minutes on the LapTop. Press F1, then F6 to restore the screen.

	Front Panel	Laptop	Screen Selected
	Key	or PC Key	Screen Selected
	Key	or PC Key

	WINDOW		Returns to first screen, then press two
	WINDOW	F1	keys for direct access to any screen as
	UP & DOWN	F1	keys for direct access to any screen as
	UP & DOWN		listed on the next screen
			listed on the next screen

	WINDOW DOWN	F2	Select next screen

	WINDOW UP	F3	Select previous screen

	VALUE+	F4	Increase program value

	VALUE-	F5	Decrease program value

	FIELD RIGHT	SPACE	Select next field in a screen

	FIELD LEFT	BACKSPACE	Select previous field in a screen

		F6	Activate full-screen viewing (PC with
		F6	PTT only)
			PTT only)

		SHIFT F6

14

Image 14

Raypak Hot Water Energy Management Control Programming, Quick Reference, Front Panel, Laptop, Screen Selected, or PC Key

Contents

INSTALLATION AND OPERATING INSTRUCTIONS RayTemp Hot Water Energy Management ControlWARRANTY Section 2. INSTALLING THE CONTROLSection 3. CONNECTING A COMPUTER OR “LAPTOP” Section 1. GETTING STARTEDSection 1. GETTING STARTED THE BIG PICTUREATTACHING THE TEMPERATURE SENSORS Section 2. INSTALLING THE CONTROLWHAT COMES WITH THE CONTROL Resulting damage will void your warranty PROVIDING 24 VAC POWER TO THE CONTROLDO NOT connect power until all wiring is complete and checkedINSTALLATION LAYOUT Fig #Stage Connections on Heater ”DIP” SWITCH SETTINGS ON CIRCUIT BOARDDIP Switch Setting on Circuit Board CONNECTING THE OPTIONAL “ELSA” BRAND MODEM USING THE FRONT PANEL TO CHECK SENSORS AND RELAYS RT-RelayStatusSection 3. CONNECTING A COMPUTER BUILDING OR BUYING INTERFACE CABLESSPACE INSTALLING PTT SOFTWARE ON YOUR PCSIMULATED FRONT PANEL DISPLAY BACKUSING YOUR PC, PTT AND MODEM TO CALL A CONTROL READING LOGGED DATATo end the modem session, select the following screen in the LapTop window Front Panel Section 4. PROGRAMMINGQUICK REFERENCE LaptopSee page Screen Code and Description - continued VIEW SENSORS AND RELAYS FIRST SCREEN AT POWER-UPMANUAL OVERRIDE TIME AND DATEFRONT PANEL MENU / LOCK ERASE MEMORY / RESET PROGRAMSECURITY PASSWORD TIME SCHEDULE SUPPLY TEMPERATUREHL SELECT - Supply High Limit If the recovery temperature or the return temperature is very low, the RayTemp may need to take the supply temperature above the programmed maximum. Regardless of any conditions, the RayTemp will not take the supply or any branch temperature above this high limit value. If the supply temperature exceeds this value by 10F then alarm dial- out will be activated. Default Temp 140F RETURN TEMPERATURE NO. Default is YESSQ - SELECT BRANCH TEMPERATURE - NOT USEDRELAY SEQUENCING Firing OptionsSENSOR OVERRIDE TEST SAVINGS TEST SETUP SAVINGS TEST RESULTSSENSOR CALIBRATION LapTop DATA MODEM SETUPLOCATION TEXT Transmit FAX MODEM SETUP AND TESTValue Day GraphsStatus OptionFunction Pages DescriptionWARRANTY