Raypak Hot Water Energy Management Control manual Screen Code and Description

Screen Code and Description - continued		See page
HL	SELECT - Supply High Limit	20
LL	SELECT - Supply Low Limit	20
DW	SELECT - Demand window in minutes	20
DM	SELECT - Demand % for maximum temperature	20
DA	SELECT - Demand % for ASL strategy	20
R0	SELECT - # of Room Sensors Installed	21
R1	SELECT - Desired Daytime Room Temperature	21
R2	SELECT - Desired Nighttime Room Temperature	21
E0	SELECT - Recovery sensor installed
E1	SELECT - Minimum recovery time
E2	SELECT - Recovery sensor response
B0	SELECT - # Branch sensors installed	22
S0	SELECT - Days to Acclimate Residents	19
S1	SELECT - Day of Month for Savings Test	24
S2	SELECT - Old Maximum Supply Temperature	24
HS	SELECT - # of water heaters	22
SP	SELECT - # stages per heater	22
SQ	SELECT - Alternating Relay Sequencing	22
US	SELECT - Use 24Volt on/off sensing	22
DD	SELECT - Deadband (also known as hysteresis)	23
D1	SELECT - Temperature Delay Between Stages	23
LK	SELECT - +- Keys Locked	18
CU	SELECT - Celsius Units	17
LG	SELECT - Access Data Logger #
XX	SELECT - Fax Graph Max Temp	27
XN	SELECT - Fax Graph Min Temp	27
XM	SELECT - Fax on Day Of Month	27
XW	SELECT - Fax on Day of Week	27
XH	SELECT - Fax on Hour of Day	27
MO	SELECT - Operating Mode	17
BA	SELECT - Communication BAUD Rate	26
NI	SELECT - Network address number

16