Basic Operation
4. Press the Conf button.
5. You will now be connected to both parties.
NOTE: If you have more than one line (including intercom call) on
you want to conference. Then, you can select another party when you have pressed the Conf button.
To disconnect one party:
Select the line (by pressing the Line button and then together with the line number) for the person you want to continue speaking with, and the other party will automatically disconnected.
To disconnect both parties:
Hang up the handset by pressing the End button.
from each party individually.
Volume Adjust
Adjust the receiver volume by pressing the VOL ( or ) buttons when you are in talk or ) buttons adjusts
the receiver volume by one level.
Speakerphone Mode
1.During a call, press the Talk button to change to speakerphone mode.
2.Press Talk again to change it back to handset mode.
Mute
on the other end of the line cannot hear you, but you can still hear them. 1. Press Mute to activate the mute feature. The mute icon turns on.
NOTE: Switching from speakerphone to handset doesn’t cancel mute.
Do Not Disturb
Adam Smith
This feature is set at individual telephones to disable (silence) an incoming ring signal,intercom ring, or page. When there is an incoming call or an intercom call, the status indicators function as normal but the phone will not ring.
24
