Intercom Operation

Intercom Operation

1.When the unit is idle, press the DND/Privacy button. The last setting is displayed.

2.Use the Vol (+ or -) buttons to scroll up or down to select the duration. You may choose from 15 minutes, 30 minutes, 45 minutes, 1 hour, or 2 hours and increase the duration by 1 hour intervals up to 24 hours.

disabled.

4. To cancel, press Privacy button again.

NOTE: To silence the ring of an incoming call without answering, press the PAGE button on the base. The call will continue normally without ringing, and can still be answered.

Hold

1. Press the Hold button to put a call on hold. 2. Hold

Transfer

You can transfer the call to another extension. 1. Press the Int/Transfer button when it is in TALK mode. 2. Key in the extension ID number you want to transfer to.

3. The desired extension will ring, and your handset will go back to standby mode.

Privacy

When you are using the phone, if you want to secure the line, press the Privacy button. Then, the line you are using cannot be picked up by another extension in the system.

Flash

Use the Flash/Exit button on the handset to activate custom calling services such as call waiting or call transfer, which are available through your local phone company.

Call Timer

After you press Talk or Line plus number button to select the line on the cordless handset, the built-in call timer shows in the display and begins counting the length of time of the call.

Out of Range

If the handset is too far from the base (out of range) you may experience static or noise. Move closer to the base or handset will automatically hang up if it is kept out of range for 30 seconds.

25

Page 25
Image 25
RCA 25420 manual Intercom Operation, Hold, Transfer, Privacy, Flash, Call Timer, Out of Range