Connections and Setup
Base Station
The phone must be connected to two line (RJ14C) wall jacks or four single line (RJ11C) wall jacks to accomodate all four lines.
IMPORTANT: Connect the AC power supply to the base unit as out lined in steps 1 through 3 below prior to connecting the telephone line cords to insure for proper base station ID assignment.
1.Choose an area near an electrical outlet and a telephone wall jack, and place your cordless telephone on a level surface, such as a desktop or tabletop.
2.Plug the power supply cord into the power jack on the back of the base and the other end into an electrical outlet.
3. Connect the telephone line cords:
of the straight telephone line cord tagged as “LINE 1+2” into the jack marked LINE 1 + 2 and one end of the other straight line cord into the jack marked LINE 3 + 4 on the back of the base. Plug the other end of each line cord into the dual- line wall jacks.
use adaptors or couplers (not included) to combine the four single telephone lines into two dual lines. The adaptor/coupler may look similar to the one pic- tured here and can be purchased from your local telephone products retailer.
9
