Recording

Viewfinder Displays (continued)

Tape Counter (0000M) with Memory Stop

Press the DISPLAY button to display the tape counter. The tape counter helps locate segments of tape.

Whenever the tape counter is displayed, the memory-stop feature turns on.

Details are on page 28.

Tape Warnings (TAPE, NO TAPE, and

TAPE END)

TAPE flashes when you try to record with the safety tab removed.

TAPE flashes when a damaged tape is inserted. Remove the tape and replace it with a new one.

NO TAPE flashes when you try to record with no cassette inserted.

TAPE END flashes when there is approximately five minutes recording time left on the tape.

TAPE END briefly appears when you reach the end of the cassette during recording.

Time and Date Display

Press the DATE/TIME button to display the time and date, AUTO date, auto TITLE, date only, or no date when the camcorder is in record-pause.

These displays are recorded on the tape when they appear in the viewfinder.

Details are on pages 18-19.

Tape-Remaining Indicator ()

Press the DISPLAY button to display the tape-remaining indicator. This display shows the approximate amount of tape left for recording or playback. Details are on page 26.

Zoom ( ) and ZOOM Indicators

The zoom indicator ( ) appears when you use the power zoom

buttons (T and W).

ZOOM appears when you zoom more than 16 times.

Details are on pages 27.

23

Page 25
Image 25
RCA CC4251 manual Tape Counter 0000M with Memory Stop, Tape Warnings TAPE, no TAPE, Time and Date Display