Date and Time Display

Set the Time and Date

You must set the correct date and time before it can be displayed and recorded on your tapes. The built-in clock cell must be charged as described on the next page.

 

CAMERA/

REW/

F.FWD Button

DATE/TIME

REVIEW

OFF/VCR

 

 

 

Button

Switch

Button

STOP/EJECT

 

 

 

 

 

 

Button

 

 

 

 

 

 

1.Attach a power supply to the camcorder.

2.Press and hold the small button on the CAMERA/OFF/VCR switch while you set it to CAMERA.

3.Press the DATE/TIME button to display the date and time in the viewfinder.

A flashing cursor lets you know which part of the display you are setting.

If the flashing cursor does not appear, press and hold DATE/TIME and then press STOP/EJECT.

12:00AM

1/ 1/1998

4.Repeatedly press the F.FWD or REW/ REVIEW until the correct month appears. Press and hold the button to advance the digits faster.

5.When the correct month is displayed, press STOP/EJECT. The cursor moves to the next part of the display.

6.Repeat steps 4 and 5 to set the correct month, day, year, hour, minute(s), and AM/PM.

7.After setting AM or PM, press the DATE/TIME button to remove the flashing cursor and start the internal clock.

To Correct the Date or Time

To correct the date or time, press and hold the DATE/TIME button and then press STOP/EJECT. The display appears along with the flashing cursor. Use STOP/ EJECT, F.FWD, and REW/REVIEW to correct the time or date. Press DATE/ TIME to remove the flashing cursor and start the clock.

18

Page 20
Image 20
RCA CC4251 manual Date and Time Display, Set the Time and Date, To Correct the Date or Time