Playback
Viewfinder Playback
Viewfinder playback is the simplest way to watch tapes using the camcorder.
CAMERA/ PLAY
OFF/VCR Button
Switch
Viewfinder | Eyepiece | STOP/EJECT |
| Button | |
|
|
BRIGHT
Control
Eyepiece Focus
Control
To Play Back a Tape
1. Attach a power supply.
Attach the adapter/charger, charged battery, or optional car cord.
2.Insert a tape.
•Press STOP/EJECT to open the cassette compartment.
•Insert the cassette with the safety tab facing up and the tape windows facing out. Press the cassette down gently until it locks into place, and close the cassette compartment door.
•The camcorder only plays back tapes recorded in the SP speed.
3.Press and hold the small button on the CAMERA/OFF/VCR switch while you slide it to VCR.
4.Adjust the viewfinder.
•Grasp the viewfinder and rotate it horizontally. Pull the viewfinder out from the camcorder and rotate the eyepiece into a comfortable viewing position
Caution: Pulling on the eyepiece might cause damage to the eyepiece or camcorder.
•Turn the eyepiece focus control to adjust the focus of the viewfinder for your vision.
•Rotate the BRIGHT control to adjust the brightness.
5.Press PLAY to begin playback.
•If necessary, adjust tracking.
•During playback, use the playback features on the following page.
6.Press STOP/EJECT when you are finished.
33
