Optional Accessories

EP096FS and EP096FL Rechargeable Batteries

These rechargeable lead-acid batteries are designed specifically for long life. The EP096FS is a 1-hour battery. The EP096FL powers your camcorder twice as long as the EP096FS (depending on how much you turn the camcorder on and off and use zoom and pause). Both can be recharged with the AC adapter/ charger that came with your camcorder.

Using the Optional AC093 Tripod

Mounting the camcorder on a tripod, such as AC093, keeps the camcorder steady and produce excellent video results.

This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick- release mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 24" when not in use. Rubber feet allow for sure footing and built-in retractable leg spikes eliminate the need for removing the feet.

POWER

CHARGE

CPS014 AC Battery Charger

The CPS014 battery charger plugs directly into an AC outlet and charges the EP096FS and EP096FL camcorder batteries. Because the CPS014 operates on 100-240 Volts, 50/60 Hz, you can use it virtually anywhere in the world.

A plug adapter might be required in some countries.

All specifications and descriptions of accessories are subject to change without notice.

Cautions: Before using a tripod, make sure it is stable enough to hold the camcorder without falling over. Do not transport the camcorder attached to the tripod.

When attaching your camcorder to a tripod, be careful not to force the tripod screw into the camcorder’s tripod mounting hole.

The tripod screw should not protrude into the camcorder more than approximately three- eighth (3/8) inch. Forcing the screw could damage the mounting hole on the bottom of the camcorder.

42

Page 44
Image 44
RCA CC4251 manual EP096FS and EP096FL Rechargeable Batteries, Using the Optional AC093 Tripod, CPS014 AC Battery Charger