Samsung VCR8875T3A/XEO Charging Lamp turns green, When the battery level display flashes

Operating the cleaner

Installing the robotic vacuum cleaner

Charging

When the product is initially purchased, the battery

is fully discharged, and you must charge the robotic Power Lamp Charging Lamp

vacuum cleaner manually.

Turn on the Power Switch at the bottom of the product.

1.After aligning the charge pins of the main unit with the charge pin of the charger station, press the main unit until you hear a “Recharging power” sound from the charger.

-The Charging Lamp turns green.

Power

Lamp

Charging Lamp

2. Check the charge status of the robotic vacuum cleaner.

- When charging starts, the battery level indicator and

“ ” will be displayed in sequence in the display panel.

-When charging is complete, the battery level indicator and

“FULL” will be displayed in the display panel. Charging Fully charged

Flash

Flash

■ When the battery level display flashes	<Charge display>
while cleaning, the robotic vacuum cleaner
stops vacuuming and automatically
charges itself at the charger.	Charge Charging	Required
	complete	charging

■When the battery level flashes and “LO” is displayed while cleaning, robotic vacuum cleaner cannot be operated by the remote control or the buttons on the main unit. In this case, directly carry the robotic vacuum cleaner to the charger to charge the battery. (This is when the battery is completely discharged.)

• When the product is initially purchased, it will take about 120 minutes to fully charge the battery and will run for about 90 minutes.

NOTE • When charging the battery while the battery is over-heated, the charging time can increase.

•Measures to take when charging is not smooth.

When the robotic vacuum cleaner cannot be automatically charged, check the following:

-Turn the Power Switch at the bottom of the robotic vacuum cleaner off and on (Reset).

-Re-plug the power of the charger (Reset).

-Check whether there are any foreign substances on the charge connector and wipe the charge connector on the main unit and the charger with a dry cloth.

-Check whether there are objects near the charger that are strong reflectors.

•When separating the robotic vacuum cleaner from the charger, it will discharge naturally.

-Charge the robotic vacuum cleaner through the charger, if possible. (When leaving your home unattended for a long period of time due to a business trip, travelling etc., turn off the Power Switch of the robotic vacuum cleaner and unplug the power of the charger to store them.)

22_ Operating the cleaner