Samsung VCR8875T3A/XEF manual Spot Cleaning, When you press the Turbo remote control button

Operating the cleaner

Using the robotic vacuum cleaner

Spot Cleaning

You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc.

■Move the robotic vacuum cleaner to the location where you want to perform a spot clean.

Main unit button Remote control button Configuration Sequence

1	Set the mode.

2time
2	Cancel the mode.

About 1.5m

About 1.5m

Normal Mode

thecleaner 03 operating

-In Spot cleaning mode, the robotic vacuum cleaner cleans an area with a length of 1.5m and a width of 1.5m.

-When cleaning is completed, the robotic vacuum cleaner will display End, Stop, and Stand by.

When the robotic vacuum cleaner is docked with the NOTE charger station, spot cleaning is not supported.

●When you press the Turbo remote control button,

CAUTION either On turbo ( ) or Off turbo ( ) is displayed on the display panel in turns. When On turbo is displayed, you can clean the floor in Turbo Mode.

●When you press the Edge remote control button, On

Edge ( ) or Off Edge ( ) is displayed on the display panel in turns. When On Edge is displayed, you can clean the floor in Edge Mode.

●If you select both Turbo Mode and Edge Mode at the

same time, the ( → ) is display on the display panel in turns.

Turbo Mode

Edge Mode

Complete Cleaning

Operating the cleaner _29