RCA DRC220N manual Connection DVD + TV + VCR, Go to

1590940A 3/7/02 9:21 AM Page 4

Chapter 1: Setup and Connections

Back of TV (example)

VIDEO		AUDIO	S-VIDEO	CABLE/ANTENNA	4
	L	R
2a	- OR -		2b

Connection: DVD + TV + VCR

1.Connect the audio cables to the AUDIO OUT L (left – white) and R (right

– red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV (sometimes labeled AUDIO IN L and R).

2.Connect the video cable.

1

AUDIO

OUT

R

OUT S-VIDEO

L

Y

Pb

Pr

VIDEO OUT

DIGITAL AUDIO OUT

OPTICALCOAXIAL

A.	Basic video connection – Connect the video cable (yellow) to the
VIDEO OUT jack on the back of your DVD Player, and to the Video
Input jack on your TV (sometimes labeled VIDEO IN).
	– OR –
B.	S-Video (optional) – If your TV has an S-Video jack, connect the

Back of DVD Player			4
	AUDIO	OUT TO TV
VIDEO
	L	R	CABLE
			OR
			OFF-AIR SIGNAL
		IN FROM ANTENNA
Back of VCR (example)			3

The back of your TV and VCR might look different than the ones pictured here.

Details about the different kinds of cables used to connect your DVD player are on page 56.

S-Video cable (not provided) to an S-VIDEO OUT jack on the back of

your DVD Player and to the S-VIDEO jack on your TV.

Note: If your TV has component video (Y, Pb, Pr) jacks, use video-grade cables (not provided) to connect the TV to the DVD player (Y to Y, Pb to Pb, etc.). It is essential to match the color coded connectors with a compatible TV.

3.Connect the antenna or cable to the Antenna Input jack on the VCR (sometimes labeled IN FROM ANTENNA).

4.Connect a coaxial cable to the Antenna Output jack on the VCR (OUT TO TV) and to the Antenna Input jack (CABLE/ANTENNA) on the TV.

5.Insert the AC power cord into an AC outlet.

Note: Don’t connect the DVD player to the VCR, or through the VCR. Doing so could negatively affect the picture quality and/or disable the DVD player.

Go to page 8

4