DRC8335_EN(verB) 7/23/07 3:36 PM Page 16
Watching TV programs
Watching TV programs
In order to use the features of the unit, you will have to get used to turning on the unit to watch TV.
1.Turn on your TV set and unit. After a few seconds the main menu of the unit appears on the television screen.
2.The ÒLive signalÓ function is already highlighted. Press OK to tune to the last channel watched.
¥To display information on the current channel, press INFO.
3. To change channel:
¥On the remote control Ð press CH+/CHÐ or the number buttons to input the channel numbers (read note on the right for details).
¥On the unit Ð press SKIP CH+/SKIP CHÐ.
When using the number buttons to change channel:
1.Input firstly the channel number.
2.Press 
.
3.Input the index number. Input Ò000Ó for analog (NTSC) channels
4.Press OK to tune to the channel.
For example, to tune to channel 
, Ò1Ó, Ò2Ó and OK.
If you only input the channel number and then press OK, the unit will perform channel search for all the channels start with the selected channel number (in the above example, all channels start with
¥When viewing ATSC broadcasts, press INFO and
then 
or 
to select and display the information on the current channel.
¥Press AGAIN/GO BACK to switch between the current and the last tuned channels when watching TV.
Watching images from connected devices
Watching images from connected devices
To select viewing a device connected to your unit (e.g. satellite receiver, camcorder), press INPUT on either the unit or remote control to show the action bar at the bottom of the screen. Select the input source (DV, AV1, AV2 or Tuner) by pressing 
or 
and then OK.
14
