19
EN
DVD playback

Discs for playback

DVD Video discs with region
code 1 or ALL
DVD±R/RW discs, DVD±R discs
(the discs must be finalized
for playback)
CDs (Audio CDs, CD-R, CD-RW,
mp3, jpeg discs)
Video CD discs (VCD, SVCD)
•Discs for recording (DVD±R/RW) are not assigned region
numbers.
•You cannot play the following types of discs: Laserdiscs,
CD-I, CD-ROM (computer only discs), discs recorded using
other broadcast standards (i.e. PAL or SECAM), or DVD-
RAM discs.
•Some discs may not be compatible due to laser pickup
and disc design.

Basic playback

1. Tune the TV to the AV channel connected with the unit.
2. Press STOP/OPEN (on the unit) or OPEN•CLOSE (on the
remote control) to open the disc tray.
3. Insert a disc in the disc tray. Press STOP/OPEN(on the
unit) or OPEN•CLOSE (on the remote control) to close
the disc tray.
4. Press PLAY/PAUSE(on the unit, under the disc tray) or
PLAY(on the remote control) to start playback.
5. Press STOP/OPEN (on the unit) or STOP (on the remote
control) to stop playback.
6. Press STOP/OPEN (on the unit) or OPEN•CLOSE (on the
remote control) to open the disc tray.
•The unit remembers the stopped point on a disc. When
the disc starts to play again, the unit picks up from the
stopped point unless the disc is unloaded or the unit is
unplugged, or the STOP key is pressed twice.
DVD control keys
Playback control keys
DVD selection key
Repeat key
Menu key
Open/close key
Make sure the DVD is selected with the VCR
indicator turned OFF when using the remote control
to perform the below operations. If the indicator is on,
press DISC on the remote control to activate the DVD.
VCR
indicator Press this
button
DRC8335_EN(verB) 7/23/07 3:36 PM Page 21