Chapter 3: Using USB Clone Tool
Learning - 22inch
Copying settings out of TV.
Rear panel of the set
SERVICE |
| AUDIO IN | ANTENNA/ |
| AV1 | (RGB/DVI) | CABLE IN |
|
|
| |
VIDEO | L AUDIO R |
|
|
1. | Turn TV on. |
2. | Connect USB Cloner to TV USB Port. |
3. | Set switch to “learning” position. |
2.5mm Stereo Cable (cross data cable)
Teaching
Learning
Side panel
USB IN | of the set |
| |
| VIDEO |
AV2 | L |
|
USB Cloner
| (Status LED will Light red without flashing.) |
4. | Connect 2.5mm Stereo Cable (cross data cable) |
| between the TV service port and the USB Cloner ser- |
| vice port. |
5. | Press the Learn button for 1 second. As soon as the |
| LED turns green, release the button. |
6. | The LED will turn Red and flash while the settings are |
| being saved to the USB Key. Upon successful copy, the |
| LED will light up yellow for 2 seconds and then return |
| to a red, constantly lit state. Upon an unsuccessful |
| copy, the LED will flash an error code as described in |
| the “Error Table” section. |
Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .
Learning - 26 inch
Copying settings out of TV.
Rear panel of the set
AUDIO IN | ANTENNA/ | DIGITAL AUDIO |
|
|
|
(RGB/DVI) | CABLE IN | OUT(COAXIAL) | SERVICE | ||
|
|
|
|
|
|
|
|
|
|
|
|
| USB IN | Side panel |
|
| of the set |
2.5mm Stereo Cable |
| VIDEO |
AV2 | L | |
(cross data cable) | - | |
|
| |
Teaching |
|
|
| USB Cloner | |
Learning |
|
|
1.Turn TV on.
2.Connect USB Cloner to TV USB Port.
3.Set switch to “learning” position.
(Status LED will Light red without flashing.)
4.Connect 2.5mm Stereo Cable (cross data cable) between the TV service port and the USB Cloner ser- vice port.
5.Press the Learn button for 1 second. As soon as the LED turns green, release the button.
6.The LED will turn Red and flash while the settings are being saved to the USB Key. Upon successful copy, the LED will light up yellow for 2 seconds and then return to a red, constantly lit state. Upon an unsuccessful copy, the LED will flash an error code as described in the “Error Table” section.
Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .
Chapter 3 | 37 |
