Removing Table Stand

Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table stand by following the instructions below:

Step 1

1.Take the TV bag and place it on a flat table.

2.Take the TV set and place it face down on the TV bag.

Step 2

Remove the Table Stand from the TV cabinet by taking off the three size M6 St-screws with a screwdriver. (Note: there are four M5 St-screws for models L46FHD2X48 & L52FHD2X48)

Step 3

TV cabinet with Stand Cap attached.

Attach the Stand Cap to the TV cabinet .

Caution: Your wall mount must be able to

Mounting Your TV to the Wall

To mount your TV to the wall, purchase a VESA wall mount

bear a minimum of five times the TV’s net weight to avoid

Models L42FHD2X48

/L46FHD2X48/L52FHD2X48

Purchase a VESA 600 x400, M6 screw

causing damage.

The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 600x400 refers to fact that the mounting measurements are 600mm horizontally and 400mm vertically. Follow the directions included with the wall mount to mount the TV to the wall.

8

Chapter 1 Connections and Setup

Page 8
Image 8
RCA L52FHD2X48, L46FHD2X48, L42FHD2X48 warranty Removing Table Stand, Mounting Your TV to the Wall