RCA L46FHD2X48, L42FHD2X48 Programming the Remote to Operate Other Components, Input Button

MUTE Reduces the TV volume to its minimum level. Press again to restore the volume.

OK When in the menu system, pressing the OK button selects the highlighted item. PIC Press the PIC button to display the Picture sub-menus.

ON•OFF When in TV Mode, pressing the ON•OFF button turns the TV on or off. If in another programmed mode (SAT/AUX or DVD), pressing the ON•OFF button turns the component on or off.

REW, REPLAY, PLAY, NEXT, FWD, REC, STOP, PAUSE (buttons at TOP of the remote)

If programmed, these buttons provide transport control for some remote-controllable components, such as VCRs or DVD players.

ZZZ(SLEEP) Press this button to display the TIME Menu and set the Sleep Timer.

SAT/AUX Places the remote in SAT/AUX mode. If Autotuning is enabled, pressing this button turns on the TV and tunes it to the satellite or cable box Video Input Channel. This button illuminates when you press a valid button in SAT/AUX mode (see Modes of Operation on page 23 for more details).

TV Turns on the TV, displays current status and puts the remote in TV Mode.

V-CHIP Press to display the Parental Control sub-menu.

VOL - or VOL + Decreases or increases the TV volume.

INPUT Button

Use the INPUT button to scroll through the available video input channels and view components connected to the TV.

1.Make sure the component is turned ON.

2.Press INPUT to tune to an available video input source and view the component.

3.To return to the previous channel, press the INPUT button until you return to the channel.

Programming the Remote to Operate Other

Components

The universal remote can be programmed to operate many brands of remote-controllable components, such as VCRs, audio components, DVD players, cable boxes, and satellite receivers. Your remote control also comes pre-programmed to control some RCA components.

Notes:

•The TV button can’t be programmed to control other components.

•The remote may not be compatible with all models of all brands of components. It also may not provide complete functionality.

Determine If You Need to Program Remote

To determine whether the universal remote needs to be programmed to operate one of the components connected to your TV, such as a DVD player, follow these steps:

1.Turn on the component (for example, the DVD player).

2.Point the remote at the component.

3.Press the corresponding component button (DVD button).

4.Press ON•OFF to see if the DVD responds. If it doesn’t, you need to program the remote to operate it.

Using the Remote Control Chapter 2

21