RCA MM27110 Connecting the G-LINK Cable, Usb Inputs/Output, HOW to Find the Remote Control Sensor

MAKING CONNECTIONS

USB INPUTS/OUTPUT

USB (Universal Serial Bus) inputs let you connect PC-type peripheral devices to the monitor. This includes devices such as joysticks, keyboards, and pointing devices (mouse, trackball). There are three USB inputs and one USB output that connects to a PC. The monitor acts as a hub to the PC.

NOTE

The USB port will function even when the monitor is in standby (off, but plugged in) mode.

USB cable (type A)

USB

PC/

HUB

DEVICE/

HUB

USB cable

(type B) (ENLARGED VIEW)

VIDEO	L	AUDIO	S-VIDEO
		R
				COMPONENT VIDEO INPUT
INPUT1			AUDIO	Y	PB	PR	DIGITAL TV
ANTENNA/			R				INPUT
CABLE INPUT						(S)VGA 1	(S)VGA 2	AUDIO OUTPUTS
									VARIABLE
							FIXED
INPUT2				SELECTED OUTPUTS			L	R	L	R
			L	VIDEO	L AUDIO	R

STEREO INPUT	AUDIO INPUTS		G-LINK	EXT SPEAKERS	EXT
INPUT3	L	R
POWER					INT
			+		+
				R	L

USB

PC/

HUB

DEVICE/

HUB

CONNECTING THE G-LINK CABLE

The G-LINK cable enables the GUIDE Plus+ Gold System (the on-screen guide that lists what shows are on TV) to work with your VCR and/or cable box. If there is a demo pin in the G-LINK jack, you must remove it before you connect the G-LINK cable. If there is no demo pin, just insert the G-LINK cable into the G-LINK jack.

Cable Box – If your TV is connected to a cable box and you don’t connect the G-LINK cable, no channels will be listed in the on-screen program guide.

VCR – If your monitor is connected to a VCR and you don’t connect the G-LINK cable, one-touch recording won’t work. The other features of the guide will work properly.

HOW TO FIND THE REMOTE CONTROL SENSOR

You have to place the wands on the G-LINK cable in front of the remote control sensor on the VCR and/or cable box. Some cable boxes and VCRs have the remote control sensor labeled on the unit. If the remote sensor isn’t labeled on your VCR and/or cable box, you need to use the remote control that came with the VCR and/or cable box to locate the sensor.

1.Turn off the VCR and/or cable box.

2.Hold the remote control (not the one that came with your TV, but the one that came with the cable box and/or VCR) so it is touching the front of the component.

The G-LINK cable is used to send commands to your VCR and/or cable box.

If there is a demo pin in the G-LINK jack, you must remove it before you connect the G-LINK cable. If there is no demo pin, just insert the G-LINK cable into the G-LINK jack.

15