RCA MM52110 manual Viewing the SVGA2 Input

MAKING CONNECTIONS

(S)VGA2 Input

The (S)VGA2 input can be used to connect an HD receiver so you can receive high definition signals.

1.Connect the supplied (S)VGA cable to your HD receiver and to the monitor. Due to copyright restrictions, you may not be able to view some high definition programs in high definition format using this product. To view material in standard definition instead, you must connect the Audio/Video jacks to the monitor.

2.Connect an RCA-type cable from the HD receiver’s audio Right, Left, and video jacks to the audio in’s Right, Left, and video jacks on the monitor.

3.Connect an Audio cable from the HD receiver’s audio right and left jacks to the monitor’s VGA left and right audio inputs.

4.Connect an optional S-Video cable from the HD receiver’s S-Video jack to the monitor’s S-Video jack.

HD RECEIVER		VIDEO
	AUDIO
R	L
R	L

-OR-

AUDIO

VIDEO	L	R	S-VIDEO	COMPONENT VIDEO INPUT
			AUDIO	Y	PB	PR
			R
INPUT 1								DIGITAL TV
ANTENNA/								INPUT	AUDIO OUTPUTS
CABLE INPUT				SELECTED OUTPUTS			(S)VGA 1	(S)VGA 2
										VARIABLE
			L		L AUDIO	R		FIXED
INPUT 2				VIDEO				L	R	L	R

USB

PC/

HUB

DEVICE/

HUB

STEREO INPUT	AUDIO INPUTS		G-LINK
INPUT 3	L	R

POWER

EXT SPEAKERS

+ +

RL

EXT

INT

Viewing the (S)VGA2 Input

1.Turn on the monitor and the HD receiver.

2.Press the TV button on the remote control.

3.Press the WHO•INPUT button on the remote control to scroll through the video inputs until you get to the VGA2 input.

If your RCA or PROSCAN HD receiver switches from a high definition output to a standard definition output, you must press the WHO•INPUT button to switch to the INPUT1 (VID1) channel in order to view the signal. There are two situations in which this would occur:

•When recording from the HD receiver.

•When a high definition output signal is not allowed by the program provider and/or movie studio for that particular program.

Direct Channel Tuning

You can set up the monitor to automatically tune to the (S)VGA2 input when you press the SAT•CABLE button on the remote. This is called Autotuning. (See “Menus and Features” for more information.)

14