Connections & Setup

Plug in the TV

Plug the flat end of the cable into the power jack on the back of the TV. Then plug the other end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug the TV into an outlet controlled by a light switch.

Put Batteries in the Remote

Remove the battery compartment cover from the back of the remote by pushing the tab and lifting off the cover.

Insert 2 fresh batteries. Make sure the polarities (+ and -) are aligned correctly.

Replace the cover.

ON•OFF

SAT•CABLE AUX

DVD

TV

GO BACK

VOLCH

MUTE

GUIDEINFO

FORMAT

SUB

CH

MENUCLEAR

TV button

OK button

Arrows

Use the Remote Control to Complete the Initial Setup

The technical term is “Navigation” – how you move through the on-screen menus. The theory is the same throughout the menu screens: highlight your choice and select it.

To highlight a menu item, press the arrow buttons on the remote to highlight one of the items listed on the screen. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left.

To select the item that you’ve highlighted, press OK.

Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).

Turn on the TV

Press TV on the remote, or press the Power button on the TV’s front panel.

Note: Pressing the TV button turns on the TV and puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.

Chapter 1

15

Page 17
Image 17
RCA R52WH79 manual Plug in the TV, Put Batteries in the Remote, Use the Remote Control to Complete the Initial Setup