Using the Remote Control

ON•OFF

SAT•CABLE AUX

DVD

TV

GO BACK

 

VOLCH

MUTE

GUIDEINFO

FORMAT

SUB

CH

MENUCLEAR

INPUTANT•CABLE

REVERSE PLAY FORWARD

RECORD STOP PAUSE

The Buttons on the Remote Control

(0-9) Number ButtonsEnter channel numbers and time settings. Also used in the

TV menu to make selections. Analog inputs: To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the 1 button until 1 and two dashes (– –) appear, then add the second two digits. Example: to tune to channel 123, press and hold 1 until 1– – appears, release the 1 button and then press 2 and 3. Digital inputs: Enter the channel number, press the right arrow button and enter the subchannel numbers. Press OK.

ANT•CABLEIn TV mode, this button switches between Antenna and Cable Input. When tuned to an input, press to go back to the most recently used tuner (Antenna or Cable Input).

Arrows (up, down, left, right)Used to move through the on-screen menus. The right arrow (Zoom+) and left arrow (Zoom-) buttons on the remote change the TV’s

screen format (when no menus are on screen).

AUXPlaces the remote in auxiliary mode to operate a device (such as a cable box, satellite receiver, VCR or DVD player etc.) you’ve programmed to work with this button. If Auto Tuning is enabled, pressing the AUX button turns on the TV and tunes to the corresponding Video Input Channel for RCA devices. AUX by default is programmed for an RCA VCR. This button lights when you press a valid button in AUX mode (see Modes of Operation on page 25 for more details).

CH + or CH - Scrolls up or down through the channel or input list. Press once to change the channel up or down; press and hold to continue changing channels.

In DVD mode (if programmed), these buttons work as chapter advance or chapter reverse buttons with some DVD players.

CLEAR  Removes any menu or display from the screen.

DVD Places the remote in DVD mode. If Auto Tuning is enabled, pressing the DVD button turns on the TV and tunes to the corresponding Video Input Channel for RCA devices. This button lights when you press a valid button in DVD mode (see Modes of Operation on page 25 for more details).

FORMAT  Changes the current video screen format. Format control is not available for digital 16:9 broadcasts.

FREEZE  Freezes the entire screen. When watching TV, freezes the picture until you press any button on the remote to resume normal TV viewing. The FREEZE feature automatically times out after a short time. Please note that when you "unfreeze" you go back to live programming (skipping any programming that occurred during the freeze).

Note: The FREEZE feature does not work on signals from the DVI-HDTV, CMP1, or CMP2 inputs in progressive scan (480p) or HDTV (1080i) modes. It also does not work on digital channels.

Do not use the Freeze feature for an extended period of time. This can cause the image to be permanently imprinted on the picture tube. Such damage is not covered by your warranty. Press any button to unfreeze the picture at any time.

GO BACK  Returns you to the previous channel. GUIDEDisplays the Channel Guide menu.

INFODisplays the Channel Banner with channel and viewing information. Press again to remove the banner.

22

Chapter 2

Page 24
Image 24
RCA R52WH79 manual Using the Remote Control, Buttons on the Remote Control