Programming the Remote to Operate Other Devices

Using the Remote Control

Tip

To turn off all the RCA devices that are connected to the TV, press ON•OFF twice within two seconds.

This feature works with most RCA products.

Note:

The SAT•CABLE, AUX and DVD buttons operate most RCA products.

INPUT Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1, CMP2 and DVI).

MENU Displays and clears the Main Menu.

Note: If you've just turned on the TV, the digital input takes some time to become available (usually about 25 seconds). While it's getting ready, you won't see the items related to the digital input in the menus. These items will show up once the digital tuner is ready.

MUTE Reduces the TV’s volume to its minimum level. Press again to restore the volume. To program this button to work with devices connected to your audio system, follow the instructions in the Volume Punchthrough Feature section on page 26.

OK When a menu item is highlighted, press OK to select the item.

ON•OFF When in TV mode, turns the TV on and off. If in another device mode (SAT•CABLE, AUX or DVD) and programmed, will turn the device on and off.

REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control for some remote-controllable VCRs, DVRs, CD and DVD players etc.

Important: The RECORD button has a safety feature that requires you to press it twice.

SAT•CABLE (Satellite•Cable) Places the remote in SAT/CABLE box mode. If Auto Tuning is enabled, turns on the TV and tunes to the satellite or cable box Video Input Channel for RCA devices. This button lights when you press a valid button in SAT•CABLE mode (see Modes of Operation on page 25 for more details).

SUB CH (Subchannel) When entering a digital channel that has a subchannel, press this button to access the subchannel entry field. Enter the subchannel and press OK to tune to the channel.

TV Places the remote in TV mode. Turns on the TV and tunes to the last-viewed TV channel or input. This button lights when you press a valid button in TV mode (see Modes of Operation on page 25 for more details).

VOL – or VOL + Decreases or increases the TV’s volume. To program this button to work with devices connected to your audio system, follow the instructions in the Volume Punchthrough Feature section on page 26.