Using the TV’s Menu System
| Go back |
| |
| Channel setup | ... | |
| Preferences | ... | |
Setup | |||
Closed caption | ... | ||
Autotuning | ... | ||
| |||
| Convergence | ... | |
|
|
|
Channel setup |
|
Go back |
|
| Both... |
Signal Source | |
Analog Signal type | Cable... |
Auto channel search | Start |
Auto channel update | Start |
List and labels | ... |
Press < / > to select where you would like to search for channels.
|
| Go back |
|
|
|
|
| |
|
| Language |
| English... | ||||
|
|
| ||||||
Preferences | ||||||||
Maximum TV volume |
|
|
|
|
| |||
|
|
|
|
| ||||
using < or > keys. | ||||||||
Select your language | ||||||||
|
| Curtain effect |
|
|
|
|
| |
|
| Special features | ... |
|
| |||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Short-term vs. Long-term
Power Outages
The Auto channel and Auto volume settings don’t take effect after
The Auto channel and Auto volume settings take effect after power outages of several minutes or more.
Setup Menu
The Setup menu lets you configure the TV to fit its surroundings and your preferences. To access the Setup menu, press MENU on the remote, and then select Setup from the main menu.
Channel setup
Signal source Allows you to set which tuner you want to search for channels. You can select Analog tuner or Digital tuner to search that tuner separately, or you can select Both to search both tuners.
Analog Signal Type (available for the analog tuner only) The analog signal type was set during the initial setup. If you change how you receive broadcasts through the antenna input, you must change the Signal type setting. Choose Cable if you are using cable or a cable box for TV signals. Choose UHF/VHF Antenna if you are using an
Auto channel search Searches for channels the current tuner (analog or digital) is receiving. Go to page 16 for more information.
Auto channel update Searches for any new channels that are not in your channel list for the current tuner and adds them to that list.
List and labels Edit the channels in the list or choose labels for each channel. Go to page 17 for more information.
Preferences
Language Allows you select your preferred language for the menus: English, Español or Français.
Maximum TV volume Allows you to set how high volume turns up when you press the VOL+ button. Highlight Maximum volume, then press and hold OK to hear the maximum volume. Make sure the volume has not been muted or turned down all the way.
Curtain effect Reveals the picture by "opening" it from the middle of the screen when the TV is switched on. Hides the picture by "closing" it from the sides when the TV is switched off.
Special features The Auto on setting switches your TV on after a power outage; Auto channel tunes the TV to the channel you specify as the Initial channel when Auto on is enabled; Auto volume tunes the TV to the volume you set in Initial volume when Auto on is enabled.
48 | Chapter 4 |
