Chapter 1

INFO SUBTITLE AUDIO SOUND

SETUP GUIDE MENU RESUME

ANGLE

GO BACK

ZOOM

REPEAT

A-B

1 2 3

PLAY MODE

4 5 6

TIME SEARCH

7 8 9

CLEAR

INDEX

0/10 +10

Number buttons (0-9)Use the number buttons to input information such as chapter numbers, track numbers, or to make selections on some menu screens.

Number buttons (0/10 and +10) The 0/10 button is used to enter a zero or 10. When you need to enter a 2-digit number, press 0/10 to enter the number 10. The +10 button is used to enter 2-digit numbers larger than 10. For example, for the number 11, press +10 and 1. For the number 12, press +10 and 2, etc. Each consecutive press of the button increases by ten. So, if you press the +10 button 3 times, the number displayed is 30. For the number 34, you would press the +10 button three times and the 4 once.

MENU Brings up the DVD player menu.

PLAY MODE Press this button to access the Play Mode info banner to set random and program playback.

(play/OK) Begins disc play and selects menu items.

(pause) Press this button to pause disc play. For DVD discs, press again to play forward a frame at a time. For audio CDs, the second press resumes playback.

REPEAT Press this button to bring up the Repeat info banner. You can repeat part or all of a chapter, track, or an entire disc.

RESUME Continues playback from point where playback was stopped.

(reverse) Press this button during playback to fast reverse through the disc.

SETUP Accesses the DVD player’s menu system.

(slow forward) Advances picture slowly.

SOUND Switches between Stereo and Mono.

(Stop) Stops disc play.

16

chapter 1

Page 20
Image 20
RCA RC5400P user manual Chapter