RCA VG4038/ VG4039 Place dhannels in the VCR’s memory, PressVCR1 to set remote to control VCR

Startup

5. Place dhannels in the VCR’s memory.

Channels 2 through 13 including line input (L) are in the VCR’s memory when you first turn it on. Pressing CHANNEL up or down stops on these channels. To get additional channels available on your antenna or cable system, you must use the Auto-Search Channels feature of the VCR. If you ever change cable or antenna signals, you may need to Auto-Search channels again.

A.PressVCR1 to set remote to control VCR.

B.Press MENU*PROG on the remote to seethe VCR MAIN MENU on the TV screen. If the menu does not appear on the TV screen:

lMake sure TV is tuned to same channel as CH3 CH4 switch on VCR or the TV’s video input (refer to TV’s manual).

b Press VCR1 and then press MENU*PROG.

lIf you use a basic hookup, check VCR indicator in display panel - it should be on. PressTVWCR to turn it on.

lCheck the connections.

C.Press 4 to select CHANNEL SETUP.

D.Press 1 to begin Auto-Search Channels.

Wait until the channel numbers stop changing. This takes about one to two minutes. The TV will then tune to the lowest channel found. Pressing CHANNEL up or down will select only the active channels.

The VCR automatically selectsANTENNA or CABLE of the

Tuning Mode feature in the CHANNEL SETUP menu. If you need to change the setting manually, press 3.

jY(R

1 VCR Plus+ Programming

2,Timer Programming

3 Review Programs

4 Channel Setup

CHANNEL SETUP

_	1	Auto-Search			Channels
	2	AddlRemqve			Channels
	3	Tuning		Node:	ANTENNA
	4	Sat./Cable			Box Setup
	0	Exit	to	Main	Menu

6. Add or remove channels from the VCR% memory.

You may want to add or remove channels if some of the channels are I

not active, have weak signals, or you do not want to watch them.

VCR-MAIN MENU

A.Press VCR1 .

B.Press MENU*PROG on the remote to see the VCR MAIN MENU on the TV screen.

C.Press 4 to display the CHANNEL SETUP menu.

D. Press 2 to display the ADD/REMOVE CHANNEL menu.

E.Follow the directions on the screen.

F.Add or remove more channels-by entering channel numbers or using CHANNEL up and down buttons.

CH 03

is presently ADDED