Location of Controls
Front Panel
Tape Compartment
Remote Sensor
CHANNEL*TRACKING (Up or Down)
Selectsnext higher or lower channel in the VCR’s channel memory.
Adjusts tracking when a tape is playing.
EJECT
Press when the VCR is stopped to eject the cassette.
F.FWD (Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture forward during playback.
PAUSE
Pauses action for viewing during playback. Pausesrecording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
POWER
Turns the VCR on or off.
REC*OTR
Starts VCR recording.
Used for one touch recording (OTR).
Remote Sensor
Receives signals from the remote control. Aim the remote at this.sensor with no objects between them.
REWIND
Rewinds the tape when the VCR is stopped. Searchesthe picture in reverse during playback.
STOP
Stops the normal functions such as record, playback, rewind, fast forward, or pause.
SPEED
Selectsa recording speed (SP, LP, SLP).
TV*VCR
Switches the picture signal so that it either comes from the VCR or the TV channel. Seepage9.
Back Panel
1 L
CH3 4 Switch
Selectsthe channel to which you will tune the TV to seethe VCR picture if you connect the VCR using one of the basic hookups.
IN FROM ANTENNA Connector
Receives a signal from an antenna or cable system when attached.
OUT TO TV Connector
Passessignal to TV using the cable supplied.
INFROM ii
ANTENNA 1
VIDEO INPUT and AUDIO INPUT Jacks Receives signals from another component, like a VCR or camcorder, when it is connected to these jacks. Use INPUT on remote to select.
VIDEO OUTPUT and AUDIO OUTPUT Jacks Sends signals from VCR to another component, like a VCR or camcorder, when it is connected to these jacks.
continued on next page
28
