Operating Instructions
To play a tape
1.Turn on the TV and tune it to channel 3,4, or TV‘s video input to see the picture from the VCR.
2.Insert a tape in the VCR.
VCR automatically turns on. Tape automatically begins playback if the safety tab on the cassettehas been removed and the Auto Play feature is turned on.
Press PLAY, if necessary.
Press CHANNEL@TRACKING on the VCR or TRACKING up or down on the remote to remove any streaks from the picture if necessary. Details qre on
page 15.
Press STOP on the VCR or remote.
Press REWIND on the VCR or REW. on the remote.
The VCR will automatically rewind the tape if it reaches the end of the tape during playback. While rewinding, you can also press POWER on the VCR or OFF on the remote and the VCR will automatically turn off after rewinding.
7.Press EJECT on the VCR to eject the tape once it is completely rewound.
13
