RCA VR646HF manual To Change the Signal Type, Adding or Removing Channels, Detect Automatically

SETTING UP THE VCR

AUTO CHANNEL SEARCH

What type of signal are you using?

1 Cable TV

2 Antenna

3>Detect Automatically

0Cancel

4.Select one of the three AUTO CHANNEL SEARCH options:

•Cable TV searches for cable channels

•Antenna searches for local broadcast stations

•Detect Automatically will make this decision for you

AUTO CHANNEL SEARCH

Now scanning channel 14

Press any key to cancel

The VCR begins scanning for the available channels—this takes about one to two minutes. When the scan is complete, the VCR tunes to the lowest channel number. At this point, pressing CHAN up or down on the remote control or VCR should only select the active channels.

To Change the Signal Type

1.Press MENU to display the VCR MAIN MENU.

2.Press 4 to display the CHANNELS menu.

3.Press 3 to change the Signal Type between CABLE and

ANTENNA.

Adding or Removing Channels

You may want to add or remove channels after you Auto

Channel Search, especially if some of the channels have weak

Detect Automatically

A strong cable or antenna signal in your area may cause Auto Detect to mis-detect. If this should happen, select 1 or 2 for the system you have.

11