RECORDING
3.Enter the VCR PlusCode programming number shown in your local television guide.
VCR PLUS+
Enter PlusCode Number (from TV listing)
12876-
Press CLEAR to erase
Press MENU when done
4. Press MENU to enter the PlusCode® system number.
How often should this program record?
1 One time
2 Daily (every day)
3 Weekdays
4 Weekly (once per week)
0Cancel
5.Indicate how often you want the program to be recorded.
Program 1 (One time)
Channel | 03 Cable |
Start Time | 08:00 PM |
End Time | 09:30 PM |
Start Date | 11/18/99 Thu |
Tape Speed | SLP |
Press CLEAR to adjust
Press MENU to save
6.Change the recording speed with the SPEED button on the remote or the program end time with the CLEAR button on the remote (if necessary).
Changing the end time comes in handy when you are recording a program, such as a sporting event, that may exceed the scheduled broadcast time.
7.Press MENU to save the program.
Program 1 has been saved
Remember to insert a recordable tape and turn the VCR off before the program start time.
Remember to leave your cable box on and tuned to the desired channel
PlusCode is a registered trademark of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
VCR Plus+ Interactive Program Guide System Recording
Clock must be set correctly.
Insert a tape with the safety tab in place and enough tape to record the program.
The TIMER indicator appears in the display when you turn off the VCR and a timer recording has been set. It flashes if there is no tape in the VCR.
PROGRAMS OVERLAP appears if you have entered two programs where the times overlap.
UNRECOGNIZED NUMBER... PLEASE
Timer recordings will not be lost in the event of an extended power outage.
31
